![]() ![]() Stix must be top coated for exterior use. Not recommended for use over polyethylene or polypropylene. Not intended for immersion service or continuous water contact. Avoid rain, moisture or high humidity for the first 24 hours of curing. Do not apply in direct sunlight or on a hot surface. Limitations: Apply when air and surface temperatures are above 35 ☏. Drywall, Plaster, Ceiling, Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles, Glossy Surfaces, PVC, Most Plastics, Masonry Walls, Wood, Trim, Shutters, Masonry, Stucco, Concrete, Cement Block, Galvanized Metal, Aluminum, etc. Recommended For: Interior and Exterior surfaces. ![]() Can be top coated with almost any product.Cures in temperatures as low as 35° F (1.57° C).Stix levels to a smooth surface and cleans up with soap and water. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer Finishes. Offers an extremely hard film when cured. Stix is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Stix Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, including PVC, Vinyl, Most Plastics, Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding, Fiberglass, and Galvanized Metals. ![]()
0 Comments
Leave a Reply. |